LEADING JET TURBINE Co., Ltd. ATJ TURBINES
19
Lower your throttle trim and the green LED will go out indicating correct
reading of
The transmitter engine shut off signal by the ECU.
On rare occasions, usually when using a Futaba transmitter, it has been
found that the
throttle channel sense of movement may require reversing (Servo reverse)
and repeat the transmitter alignment.
Correct reading of throttle % by the ECU can be verified in the second
screen,
percentage of the throttle position is shown on, 0% in the position of
engine stop (trim and stick down), 100% with stick/trim full up and
between 10% and 30% at idle.
This now completes your radio setup and should only need doing again if
the radio settings
in the TX are changed.