LEADING JET TURBINE Co., Ltd. ATJ TURBINES
18
The screen will now change to:
Move the trim (or switch the “engine cut” switch to on) and throttle stick
back to zero and again press the right hand button (+). The display will now
change to:
Leaving the throttle stick in the minimum position, raise the throttle trim
to the full up position or switch “Engine Cut” switch to off, and again
press the “+” button. The ECU will store the current position as IDLE.
If you have done all steps correctly the green LED located directly above
the data terminal socket will light up in the ECU when the “Idle” command.
(Trim and throttle stick set to idle positions on the transmitter).
