LEADING JET TURBINE Co., Ltd. ATJ TURBINES
22
Next menu let you to choose in four submenus, selected by pressing the
button under of each option.
Start: Jump to the parameters used on startup
Info: Information and test menus
Radio: Adjust the radio throws
Run: Set the parameters used during engine run.
Throttle curves
FULL EXPO: Mean linear RPM, it is the default setting and the mode used for
all previous software versions. Thrust develops exponentially, and
it is the recommended curve for big engines or/and high
thrust/weight ratio planes, as it ease the control in low power used
during taxi.
HALF EXPO: An intermediate setting between the other two modes.
Stick position
LINEAR: Mean that the thrust develop linearly with the throttle setting.
Could cause difficult taxi, as it would be difficult to fine adjust the
power at low setting.
MODE
0% (Idle)
25%
50%
75%
100%
FULL EXPO Idle thrust
6%
25%
56%
100%
HALF EXPO Idle thrust
16%
38%
66%
100%
LINEAR
Idle thrust
25%
50%
75%
100%
Throttle curves can be changed while the engine running, so you can leave
the throttle at a given position and switch between the curves to see the
difference.
