22
23
Stecker ans Netz anschließen, der Foamer ist jetzt
in Betrieb.
Schalldämpfer außerhalb der Abdeckung
verlegen (4), der Silikonschlauch sollte nicht
verlängert oder modifiziert werden.
Lufteinstellschraube (5) aufdrehen so, dass die
Luftblasen in die Mitte (6) des Reaktors hoch
steigen. Es kann sein, dass ein neu betriebener
Abschäumer eine Startphase von einigen Stunden
bis zu einem Tag für eine gute Abschäumung
benötigt. Bei wässrigem Schaum muss die
Lufteinstellschraube etwas zugedreht werden.
Bei dunklem und trockenem Schaum muss die
Lufteinstellschraube etwas aufgedreht werden. Nur
in kleinen Schritten arbeiten!
Hinweis: In der Startphase des
Meerwasseraquariums ist das Schaumwasser
hell und wässrig. Der Comline
®
DOC Skimmer
9012 / 9012 DC passt seine Schaumproduktion an
das Becken an, ständig dunkler Schaum ist nicht
zwangsläufig.
Die richtige Abschäumerleistung erreicht man nach
etwa drei Wochen Betrieb, nachdem sich ein Biofilm
auf alle interne Teile des DOC Skimmers gelegt hat.
Raccordez la prise électrique au secteur, le Foamer
est en service.
Fixez le silencieux d’air à l’extérieur de la galerie (4),
son tuyau silicone ne doit pas être modifié ou
prolongé.
Ouvrez la vis de réglage d’air (5) de manière à ce que
les bulles d’air atteignent le milieu du réacteur (6).
Il est possible que l’écumeur nécessite quelques
heures à une journée avant une bonne production
d’écume. Si l’écume est trop liquide, refermez
légèrement la vis d’air (sens horaire). Si l’écume
est trop concentrée, ouvrez la vis d’air (sens anti-
horaire). Procédez uniquement par petites étapes!
Remarque: Durant la phase de démarrage d’un
aquarium marin, le liquide écumé est généralement
de couleur claire et de consistance assez liquide.
Comline
®
DOC Skimmer 9012 / 9012 DC adapte
sa production d’écume à la charge organique de
l’aquarium, une écume foncée en permanence
n’est pas la règle.
La puissance réelle d’écumage n’est souvent atteinte
qu’après env. 3 semaines de fonctionnement,
lorsqu’un biofilm a recouvert toutes les parties
internes de l’appareil.
Connect the plug to the power outlet; the Foamer
will then start to operate.
Install the silencer outside of the aquarium (4), the
silicone tubing should not be extended or modified.
Open the air adjustment screw (5) to the extent, that
the air bubbles rise up in the middle of (6) the reactor.
It is possible that a newly operated skimmer requires
a start-up phase of a few hours or up to a day until it
can deliver a proper skimming performance. In case
of aqueous foam the air adjustment screw must be
closed somewhat. In case of dark and dry foam the
air adjustment screw must be opened somewhat.
Only adjust in small steps!
Notice: During the starting phase of the seawater
aquarium the foaming water will be light-colored
and watery. The Comline
®
DOC Skimmer 9012 /
9012 DC automatically adjusts its foam production
to the aquarium, and dark foam will not necessarily
always be present.
The proper skimming performance will be reached
after about three weeks of operation, after a biofilm has
developed on all internal parts of the DOC Skimmer.