Tunstall Lifeline 4000 Скачать руководство пользователя

Страница: 57 / 80

Lifeline 4000 Advanced User Guide (B)

Intruder monitoring

The intruder detection option relies upon intruder detectors, such as sensors that detect when a

pane of glass has been broken, as well as movement sensors, such as PIRs and pressure mats. The

section on

Triggers

earlier in this chapter suggests how these can be registered and configured.

Parameter 48 is used to enable and configure the intruder feature.

The first digit in the example above is set to zero if the intruder

feature is not enabled, and one if the feature is enabled.

Exit tones.

Lifeline will always sound exit tones once the

intruder alarm has been turned on. These remind a resident that

they have just a short time before the alarm is armed.

Entry tones.

Lifeline can sound tones when a resident enters

their house or flat. These tones remind the resident that they have

triggered the intruder alarm and they need to enter their personal

identification number (PIN) soon, before the Lifeline 4000 raises

an alarm call. Entry tones help to prevent false alarms. However,

entry tones also alert intruders to the presence of an alarm. Consequently, some resident prefer

not to have these tones. The second digit in the example above determines whether residents hear

entry tones from the Lifeline 4000 when they re-enter their house of flat and disable the alarm. If

the second digit is set to one then the resident will hear entry tones. If the digit is set to two then

the resident will not hear entry tones.

Test mode.

The last digit in the example above determines whether Lifeline beeps every time a

trigger from a movement sensor is received. If this last digit is set to zero then a beep will be

heard every time a movement sensor is set off. To disable this feature you need to enter a one.

This feature is very useful when you are setting up and testing an alarm. However, it is important

to turn this feature off (to enter a one as the last digit) once you have finished an installation,

otherwise the beeping can become annoying.

Содержание Lifeline 4000












































































Результаты поиска

Содержание Lifeline 4000

Отзывы:

Похожие инструкции для Lifeline 4000

Бренды по названию

Популярные бренды

Tunstall Lifeline 4000, Руководство пользователя

Результаты поиска

Содержание Lifeline 4000

Отзывы:

Похожие инструкции для Lifeline 4000

Бренды по названию

Популярные бренды