Figure 6 Bolt Method Mounting Hole Locations
6.G Tilt Angle Selection
Module tilt angle is measured between the module and the ground as shown in Figure 7, with modules generating
the maximum power when they face sunlight directly (incident light perpendicular to module front surface).
The modules should be oriented to face south in the Northern Hemisphere and face north in the Southern
Hemisphere.
For installations where the modules are mounted on a permanent structure, they should be tilted so that the
energy production from the modules will be maximized on an annual basis. Generally this result will be achieved
when the tilt angle is near the value of the latitude of the mounting site. Use photovoltaic system simulation tools
or consult professional installers / system integrators to determine optimum tilt angle.
Tilt angles of at least 10° are recommended to reduce dirt or other substance accumulation. Please do not mount
the module in landscape orientation with less than 10
°
tilt angle.
Figure 7 Tilt Angle Definition
All measurements in mm [inches]
Содержание TS-110C1
Страница 14: ...Figure 12 Middle Clamp Figure 13 End Clamp...
Страница 15: ...Figure 14 Module Clamp Mounting Method...
