TSL SAM-Q-SDI, Инструкция по установке и эксплуатации

Страница: 48 / 110

Page 48 of 110
The sources currently belonging to the chosen Mix Group are now shown, alongside the Source Select
buttons to which they are currently assigned. (Please note that factory default source names are shown in
this example)
Select the Source Select button for which you wish to assign a new source.
The audio source currently assigned to the Source Select button chosen above is now shown, along with
other properties (see below)
Item Menu Item Description
1 Source L Allows the Left Channel of the audio source to be changed using the large
rotary encoder. The Source name shown here represents the physical
input/signal type and channels within (see below)
2 Source R Allows the Right Channel of the audio source to be changed using the large
rotary encoder. The Source name shown here represents the physical
input/signal type and channels within (see below)
3 Shows the friendly name of the currently selected Left Channel. Source
name shown here is user configurable (see below)
4 Shows the friendly name of the currently selected Right Channel. Source
name shown here is user configurable (see below)
5 Stereo/Mono switch Determines if the audio source mapped to the currently selected Source
Select button is Mono or Stereo (see below)
6 Trim setting Allows a trim level of -20dB, -10dB, +10dB or +20dB to be applied to the
audio source(s) assigned to the currently selected Source Select button.
1
3
5
6
2
4