TSL SAM-Q-SDI, Инструкция по установке и эксплуатации

Страница: 31 / 110

Page 31 of 110
Operational Mode – Loudness Summary
Loudness Summary mode displays Momentary and Short-Term loudness meters as well as Integrated
loudness values belonging to the 8 SAM-Q loudness probes in a single view.
Loudness Summary mode allows a single loudness probe to be selected for monitoring at a time.
Selecting the desired loudness probe is achieved simply by pressing the corresponding Source Select
button.
When a loudness probe is selected for monitoring, its Source Select button will turn Green and its
corresponding loudness level meters will be highlighted.
In the example above, loudness probe # 2 has been selected for monitoring and a downmix will be
presented to all SAM-Q-SDI audio outputs.
In the example below, a Loudness Target of -23 LUFS has been set and is shown by a horizontal white line,
whilst the current Integrated Loudness values of each Loudness Probe is indicated by a horizontal red line
and numeric value.
Integrated Loudness Value
Momentary Loudness Meter
Short-Term Loudness Meter
Selecting a different loudness probe for monitoring causes the previously selected loudness mode to be
deselected automatically.
Please refer to the Loudness Setup Menu option later in this document for Information on how sources can
be routed to specific audio loudness probes.