TSL SAM-Q-SDI, Инструкция по установке и эксплуатации

Страница: 36 / 110

Page 36 of 110
The User Menu
The User Menu can be freely accessed from any Operational Mode simply by pushing and holding the F1
Function button for 1 second.
Access to the User Menu is available to everyone and is not PIN protected.
To change a setting, simply press the corresponding Source Select button, enter the new value by rotating
the large encoder and then apply the change either by pressing the source select button or by pushing the
large encoder to finish.
The User Menu also provides access to three sub-menus (
About, Status and System Setup ). To enter any of
these sub-menus simply press the corresponding Source Select button the chosen sub-menu.
To return to the previous Menu, simply press the F1 Function button.
To exit all Menus and return to normal operation push and hold the F1 Function button for 1 second.
* Access to the System Setup Menu is restricted by a PIN Code (see page 38 of this Manual)
Source
Select
Button Menu Item Description
1 Brightness Allows the Brightness of the front panel displays to be adjusted.
2 Mode Allows the current Operation Mode to be changed*
5 About Enters About sub-menu
6 Status Enters System Status sub-menu
8 System Setup Enters System Setup sub-menu*