TSL SAM-Q-SDI, Инструкция по установке и эксплуатации

Страница: 50 / 110

Page 50 of 110
To change the audio source assigned to the left-hand channel of an audio source, push button 1 (see below)
and use the large encoder to scroll through a list of the available audio sources.
Similarly, to change the audio source assigned to the right-hand channel of an audio source, push button 2
(see below) and use the large encoder to scroll through a list of the available audio sources.
Each of the 8 audio sources within an audio mix can comprise a single audio pair (typically used for Stereo
sources) or a single audio channel (typically used for Mono sources).
To change the currently selected audio source between Stereo and Mono modes, push button 5 (shown
below) and use the large encoder to change the value as appropriate.
Selecting Stereo mode (Item 5) will cause a dual audio level meter to be displayed for the respective source
in the chosen Mix Group. Both Left and Right sources (Items 1 and 2 above) will be audible when selected
by the User (see below).
Selecting Mono mode (Item 5) will cause a single audio level meter to be displayed, with the source
assigned to the Right-Hand channel being ignored. Only the Left-Hand channel will be audible when
selected by the User (see below).
Both Stereo and Mono sources can be accommodated within the same Mix and can be easily recognised
by the nature of their respective audio level meters (see below)
1
3
5
6
2
4