TSI Incorporated portacount pro 8030, Руководство по эксплуатации и обслуживанию

Страница: 54 / 93

48 Chapter 5
2. To change the time, select the segment of time you want to
change (hour, minute, second), then use the arrows to increase
or decease the value.
3. Select the Date Format from the Date Format box.
Note : When you set the date format here it does not change the
date format that F
IT
P
RO
™
software uses. When data is
exchanged with F
IT
P
RO
™
software, it is exchanged in a
universal date format.
4. Press OK to close this dialog and save your settings or Cancel
to close the dialog without changing it.
Device Info
Press Device Info [ ] to view the model number, serial number
and version level of your P
ORTA
C
OUNT
®
P
RO
fit tester. The box
that appears also contains other information that may be helpful
with troubleshooting the instrument with a TSI representative.
Touch Screen Calibration
Press Touch Screen Calibration [ ] to recalibrate the touch
screen. The touch screen needs recalibration when you touch one
area of the screen and the wrong action is performed. This is most
noticeable when using the on-screen keyboard. For example, you
touch the “u” and “j” appears. Use the stylus for calibration,
not
your finger.
As instructed on the touch screen, “Carefully press and briefly hold
stylus on the center of the target. Repeat as the target moves around
the screen.”
When the calibration is complete, you are notified that the settings
have been measured. Press anywhere on the screen to end the
calibration.