TSE DPT40-B, Руководство пользователя

Страница: 151 / 472

Lubrication & Maintenance — 1500 Hours/24 Months
Continued on next page DN28805,0001EF7 -19-23SEP14-1/2
Changing Open Crankcase Ventilation (OCV)
Filter
Service checks of the OCV include checking and/or
replacement of worn, cracked, leaking, or bulging hoses
and for good clamp tension on all hose ends.
Expectation for minimal service interval will be at least
1500 hours.
NOTE: OCV Filter must be replaced as an assembly,
the filter inside is not serviceable.
Remove OCV Filter Assembly
1. Squeeze constant tension clamps (C) on both ends of
the OCV filter outlet hose (E) with suitable tool and
position clamps onto the OCV filter outlet tube (F).
Remove the OCV filter outlet hose (E) from the OCV
filter outlet hose barb and OCV filter outlet tube (F).
2. Squeeze constant tension clamps (C) on the OCV
filter oil drain hose (K) with suitable tool and position
clamp 50 mm (2.0 in.) from the end of the hose.
Remove the OCV filter oil drain hose (K) from the OCV
filter assembly (J), inspect for damage.
3. Squeeze constant tension clamps (C) on both ends of
OCV filter inlet hose (D) with suitable tool and position
clamps onto the OCV filter inlet tube (A).
Remove the OCV filter inlet hose (D) from the hose
barb of the OCV filter assembly (J) and the OCV filter
inlet tube (A), inspect for damage.
4. Remove two cap screws (I) from the OCV filter
assembly (J). Remove OCV filter assembly (J).
RG25157
—UN—03MAR14
OCV Filter Assembly
A—OCV Filter Inlet Tube
B—M6 x 16 mm Cap Screw
C—Constant Tension Clamp
D—OCV Filter Inlet Hose
E—OCV Filter Outlet Hose
F— OCV Filter Outlet Tube
G—M8 Flanged Head Nut
H—OCV Air Vent Hose I— M8 x 30 mm Cap Screw (2
used)
J— OCV Filter Assembly
K—Oil Drain Hose
L— Oil Drain Check Valve
M—O-ring
N—P-Clamp
O—O-ring
50-1 032715
PN=104