TSE DPT40-B, Руководство пользователя

Страница: 302 / 472

saue
63
Series 90 Minor Repair Instructions 9
Install Drive Coupling Install Alignment Pin in
Cover (CCW Rotation
shown)
90000298- 90000297
Install Auxiliary Pad
Adapter Screws
Torque Pad Adapter
Screws
90000305 90000281
Install O-Ring on End
Cap Pilot
Install Auxiliary Pad
Adapter
90000303 90000302
Install New Charge Pump
Cover
Install Screws and Cover
Retainer
90000300 90000299
5. Install the auxiliary drive coupling onto the pump
drive shaft spline (auxiliary drive spline must be
toward the rear of the pump).
6. Carefully remove the alignment pin from the
charge pump parts. Install the pin in its hole in the
new charge pump cover (with hole for the auxil-
iary coupling) and retain with petroleum jelly.
Install the new charge pump cover with alignment
pin into the end cap and the aligned charge pump
parts.
CAUTION
In order to avoid loss of charge pressure,
always install the charge pump cover with the
pad drain hole located on the same side of the
end cap as the charge inlet port.
7. Install the charge pump cover retainer and the six
hex screws and torque the screws to 13.5 Nm (10
ft•lbf) for 030 through 100 pumps, and 32 Nm (24
ft•lbf) for 130 through 250 pumps.
8. Install O-ring on end cap pilot.
9. Install the auxiliary mounting pad adapter on
external pilot on rear of end cap.
10. Install four new large screws and washers through
the mounting pad and end cap into the housing.
Torque per the accompanying table.
11. Install the O-ring and flange cover or auxiliary
pump.
Auxiliary Pad Conversion
To convert an auxiliary mounting pad to a different
size mounting pad, use the above procedure with the
following additions:
After removing the charge pump cover (step 2),
remove the old auxiliary drive coupling.
After removing the four end cap retaining screws
(step 3), remove the old auxiliary mounting pad
adapter.
e z i S e m a r F
e z i S h c n e r W
) x e H l a n r e t n I (
e u q r o T
m N t f • f b l
) y l r a e ( 2 4 0 & 0 3 0 m m 8 5 7 5 5
5 5 0 & ) e t a l ( 2 4 0 m m 0 1 2 2 1 0 9
5 7 0 m m 4 1 6 5 2 9 8 1
0 3 1 & 0 0 1 m m 4 1 8 9 2 0 2 2
0 5 2 & 0 8 1 m m 7 1 0 8 5 9 2 4
CONTENTS