TSE DPT40-B, Руководство пользователя

Страница: 246 / 472

saue
7
Series 90 Functional Description 2
Control handle
Displacement control valve
Orificed
check valve
Heat exchanger
bypass valve
Heat exchanger
Reservoir
Vacuum gauge
Multi-function
valve
Servo control
cylinder
Pump
swashplate
Motor swashplate
Input
shaft
Output
shaft
to
pump
case
Charge pump
Servo pressure
relief valve
Multi-function
valve
Charge pressure
relief valve
Fixed displacement
motor
Servo control
cylinder
Reversible
variable
displacement
pump
Case drain fluid
System loop
(high pressure)
System loop
(low pressure)
Loop flushing valve
Purge relief valve
Control fluid
Suction line
Pump Motor
Basic Closed Circuit
Input
PV
MV
Case
Drain
Line
Output
Flow (Bi-directional)
Reservoir
90000803
The Basic Closed Circuit
The main ports of the pump are connected by hydrau-
lic lines to the main ports of the motor. Fluid flows, in
either direction, from the pump to the motor then back
to the pump in this closed circuit. Either of the hydrau-
lic lines can be under high pressure. The position of
the pump swashplate determines which line is high
pressure as well as the direction of fluid flow.
Case Drain and Heat Exchanger
The pump and motor require case drain lines to
remove hot fluid from the system. The motor should
be drained from its topmost drain port to ensure the
case remains full of fluid. The motor case drain can
then be connected to the lower drain port on the pump
housing and out the top most port. A heat exchanger,
with a bypass valve, is required to cool the case drain
fluid before it returns to the reservoir.
Circuit Diagram for Series 90 PV and Series 90 MF
90000800
2.2 The System Circuit
CONTENTS