TRUST 740C POWERC@M ZOOM
16.2.2
Using the Trust Photo Upload software
1.
Start Trust Photo Upload from the Windows Start menu (Start – Programs –
Trust – Trust Photo Upload).
2.
Use the ‘Explorer’ to select the photographs you wish to upload. You can use
the buttons on the right-hand side of the Explorer to select photographs,
deselect photographs, view photographs, edit photographs, etc.
3. Click
on
‘Upload’.
4.
Enter your e-mail address and the password for your Trust registration (not
the password for your e-mail account).
5.
Click on ‘Next’. Your login information will be checked. This may take some
time.
6.
Select the photo album where you wish to upload the photographs to or create
a new album.
7.
Click on ‘Next’. The photographs will now be uploaded. The progress will be
displayed on your monitor. This may take a long time if you use an analogue
modem.
8.
Click on ‘Close’ to close the window.
Go to the website www.trustphotosite.com and sign in.
You can now view or sort the photos etc. Please consult Help on the website for more
information about this.
17 ArcSoft
application
programs
Two ArcSoft applications are supplied with the camera: PhotoBase 3.0 and
PhotoImpression 3.0.
These applications do not have to be installed to use the camera. However, these
programs can be used to edit, manage and organize your photographs and video
clips.
Install the application as follows.
1.
Start the Trust Software Installer. (Start – Run – D:\Setup.exe)
2. Select
‘Install
software’.
3.
Select one of the ArcSoft applications.
4.
Follow the on-screen instructions to complete the installation.
5.
Repeat points 3 and 4 to install the other ArcSoft programs.
Note:
If you do not play your video recordings on your computer then install
Apple QuickTime with the CD supplied.
17.1
Using the ArcSoft programs
This section explains the most important functions of the applications supplied with
the camera. See the Help function of the various programs if you require further
information. The Help function in PhotoImpression 3.0 can be opened by clicking on
the question mark in the top right-hand corner of the window. The Help function in
PhotoBase 3.0 is opened by clicking on the Help menu in the menu bar. Then select
Contents.
Consult the Arcsoft help function also.
18
