Trust 13597, Руководство пользователя

Страница: 2 / 14

TRUST SPEEDSHARE HOME WIRELESS WEB STATION
2
4 Functions
The router has a number of indicators (LED’s), as shown in figure 1 on the foldout
page. The table below gives a short explanation of the status of the LED’s, as well
as an explanation of the connections.
Function Description
On Indicates the status of the WLAN link. A WLAN Act LED
(green)
Flashing Data is being transferred.
B
Diagnosis LED
(green) On Indicates that there is a connection
fault.
This LED starts to flash when the router
is turned on or reset to indicate that the
router is busy carrying out a self-
diagnosis. The router is ready for use
once the LED goes out after the test
has been completed.
On The router receives a power supply. C Power (green)
Off The router does not receive any power.
Check whether the adapter has been
connected.
On A connection has been made with the
local network.
Flashing Data is being sent or received over the
local network.
D Link/Act LED
(green)
Off No connection with the local network.
On (green) There is a double connection over the
local network (Full duplex).
Flashing
(orange) The router cannot send the large
quantity of information over the local
network (data collision).
E Full/Col
Off There is a single connection over the
local network (Half duplex).
On (green) Indicates that there is a 100 Mbit
connection over the local network. F 100
Off Indicates that there is a 10 Mbit
connection over the local network.
G Link / Act See point D , but now for a DSL/cable connection. Also
called a WAN connection.
H Full/Col See point E , but now for a DSL/cable connection. Also
called a WAN connection.
I
100
See point F , but now for a DSL/cable connection. Also
called a WAN connection.
J Reset Button to return the router to the default settings. Note:
this button also deletes all your personal settings. See
chapter 10 for instructions on how to use this button.
K WAN DSL/cable port (ADSL or cable modem).
L 1 - 4 Connection ports for network computers.
M Power Connection point for the power adapter: 5 Volt DC/2.5 A
Table 1: Functions