TRUST SPEEDSHARE HOME WIRELESS WEB STATION
12
1.
Insert the CD-ROM into your computer’s CD-ROM drive. The Trust Software
Installer will start automatically. If it does not start automatically, carry out
the following:
a)
Select 'Run' from the Windows Start menu.
b)
Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software
Installer.
2.
The Trust Software Installer will appear. Select the language you wish to
use for the installation.
3.
Click on ‘Read Internet Sharing manual’ to open the instruction manual.
12 Troubleshooting
Method
1.
Read the solutions given below.
2.
Check for up-to-date FAQ’s, drivers and instruction
manuals on the Internet (www.trust.com/13597).
Problem
Cause
Possible solution
You have forgotten
the password for the
router.
-
Reset the router (see chapter
10).
The cable has not been
connected or has not
been connected
correctly.
Check whether the cable has
been correctly connected to
the Access Point.
The WEP key security
has been enabled.
Configure the WEP key for
the Access Point the same as
for the router (see chapter 9).
No stations or printers
have been shared with
other computers in the
network.
Share at least 1 station or 1
printer to make the computer
visible in the network.
The PC workgroup
name is not the same
as the workgroup name
for the other computers
in the network.
Change the workgroup name
in the ‘Network properties’.
See chapter 6 of the Internet
Sharing instruction manual
which is included on the Trust
Installation CD-ROM and also
provided in printed format.
The other computers
are not visible on the
network or the
Access Point does
not work.
The network settings
are incorrect.
See the Internet Sharing
instruction manual which is
included on the Trust
Installation CD-ROM and also
provided in printed format.
!
