Data Plate:
The data plate is located behind the front panel.
Installation:
The Salamander is provided with two mounting
brackets. The brackets may be fitted in two ways
as follows:
Select a suitable location and fix the mounting
brackets in position (Refer ‘Installation Clearances’
below). The brackets must be securely mounted.
Mount the Salamander to the brackets by inserting
the four M10 mounting bolts (supplied) from the
underside of the bracket into the Salamander.
Warning: The Salamander mounting bolts must
be inserted and secured.
Warning: The Salamander should never be
installed and operated as a counter top unit.
Installation Clearances:
The
MINIMUM
clearances from combustible
surfaces are:
Sides: 300mm
(Note: the sides of the Salamander
are removable and adequate clearance must be
provided for safe handling large products.
Rear: 100mm
Adequate clearance must also be provided for
service.
Salamander Manual
Page 8
Revision: 13 Sep 07
OPERATOR MANUAL S86 130907.doc
