TRU-BLU K9000 2.0, Руководство оператора

Страница: 32 / 57

https://k9000dogwash.sharepoint.com/sites/K9000/Shared Documents/General/Build/Furever Clean/Furever Clean K9000
2.0/K9000 2.0 Canadian Operators Manual v2.0.docx
Page 32
Last edited 02/04/2019
© Atlantic Industries 2018
Coin activation
Cont’d…
•
The Microcoin QL-Timer can be programmed using its On-Board Programming facility
(OBP).
•
Each OBP feature can be accessed by a series of button presses, using the OBP
programming button, which is located below the LED indicators.
•
Please use a firm and rapid button press to access each Mode. You will be shown a
unique “M” LED flash sequence to indicate the selected Mode.
Feature Description Visual Indicators
Enable Press button once. LED flashes GREEN
Coin
Pass the coin to be enabled through the QL.
If successful, LED will go steady GREEN
Disable Press button twice. LED flashes RED
Coin
Pass the coin to be disabled through the QL.
If successful, LED will go steady GREEN
Program Press button 3 times LED flashes ORANGE
Multi Coin
Press Button to get to required Cat number (1
– 12)
Displayed on side of unit
Pass 10 Coins through the QL
LED flashes ORANGE
After the 10
th
coin or token has passed through
LED will go steady ORANGE
Display should now show number “1”
This is the credit multiplier, Number 1 = 1 pulse = $1 1
If programming a Token to = $10, press button until
Display shows “0”
Press & Hold Button, LED will go steady GREEN
M 1 2 3
M 1 2 3
M 1 2 3
M 1 2 3
M 1 2 3
M
M