TRU-BLU K9000 2.0, Руководство оператора

Страница: 15 / 57

https://k9000dogwash.sharepoint.com/sites/K9000/Shared Documents/General/Build/Furever Clean/Furever Clean K9000
2.0/K9000 2.0 Canadian Operators Manual v2.0.docx
Page 15
Last edited 02/04/2019
© Atlantic Industries 2018
2.4 Attaching a Suction Line to a Pump
Pictured on the left is that of a pump inside the dog wash with the pump head circled to
enable you to understand the orientation of the pump head when fitted in the dog wash. The
middle picture is a close up of the pump head while the last picture is of the suction line to be
fitted to the pump head.
Prior to attaching the suction line to the pump, attach it to the soap management system.
The photo left is of the main
electrical cable entry point to the
dog wash. Once you have run the
conduit to this point, THEN leave
another 1 meter for the
termination inside the dog wash.