manualshive.com logo in svg

TROY XCD MAN-EXT2000, Руководство администратора


Поделиться
Скачать
background image

13-10   PrintraNet Internet Printing

by accessing the print server console through the print server
serial port or via TELNET, DEC NCP, or XCD's XCONFIG
utilities.  Refer to Appendix A for information on how to use
the serial port, TELNET, NCP, or XCONFIG to access the
print server console.

Print Server Configuration Checklist

Before configuring the print server to receive PrintraNet
print jobs, check the following:

1. Make sure that the E-mail server at the remote site (the

receiving end) is configured to handle the TCP/IP POP3,
and SMTP protocols (SMTP is only required if the
notification feature is enabled).

2. Configure the POP3 server on the E-mail server at the

remote site with a mail account and password for the
remote printer (generally, the mail account name will be
the first part of the name that you assigned in step 9 of
the previous section; for example, if you assigned the
name [email protected], the account name would be
emailprinter).  The procedure for configuring a POP3
server varies depending on the operating system of the E-
mail server, so consult your operating system
documentation for details.

3. Make sure that the TROY XCD print server is installed

and running with TCP/IP enabled and has a valid IP
address assigned to it.

Because access to the E-mail server on most networks is
usually restricted, you may need to have your network
administrator check the configuration and add the mail
account.

Содержание MAN-EXT2000





























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MAN-EXT2000

Zenith z-server lt User Manual preview
z-server lt
Бренд: Zenith Страницы: 218
iDPRT iMOVE T3Pro User Manual preview
iMOVE T3Pro
Бренд: iDPRT Страницы: 74
Memjet AS-1180C Service Manual preview
AS-1180C
Бренд: Memjet Страницы: 181
Xiamen Hanin Electronic Technology MPT8E User Manual preview
MPT8E
Бренд: Xiamen Hanin Electronic Technology Страницы: 27
LaserLine GL3000T Instruction Manual & Safety Warnings preview
GL3000T
Бренд: LaserLine Страницы: 14
NEC R120d-1E N8100-1954F Maintenance Manual preview
R120d-1E N8100-1954F
Бренд: NEC Страницы: 166
OKIDATA OL830 Service Manual preview
OL830
Бренд: OKIDATA Страницы: 158
Xerox 6360V_DN Brochure preview
6360V_DN
Бренд: Xerox Страницы: 4
IBM Netfinity 4500R Installation Manual preview
Netfinity 4500R
Бренд: IBM Страницы: 60
Infotrend EonServ 7000 Series Quick Installation Manual preview
EonServ 7000 Series
Бренд: Infotrend Страницы: 2
Epson ActionPrinter 3250 - ActionPrinter-3250 Impact Printer Product Support Bulletin preview
ActionPrinter 3250 - ActionPrinter-3250 Impact Printer
Бренд: Epson Страницы: 22
Epson ActionPrinter 4000 Specifications preview
ActionPrinter 4000
Бренд: Epson Страницы: 2
Epson ActionPrinter 3260 s User Manual preview
ActionPrinter 3260 s
Бренд: Epson Страницы: 116
Epson ActionPrinter 5000 - ActionPrinter-5000 Impact Printer Assembly Manual preview
ActionPrinter 5000 - ActionPrinter-5000 Impact Printer
Бренд: Epson Страницы: 8
Epson ActionPrinter 3250 Network Manual preview
ActionPrinter 3250
Бренд: Epson Страницы: 133
Epson ActionPrinter 3000 User Manual preview
ActionPrinter 3000
Бренд: Epson Страницы: 125
Epson ActionPrinter 3000 Service Manual preview
ActionPrinter 3000
Бренд: Epson Страницы: 193
Epson ActionPrinter 4000 User Manual preview
ActionPrinter 4000
Бренд: Epson Страницы: 290

Бренды по названию

Популярные бренды

Загрузить еще бренды