Trox Technik EM-IP, Руководство по настройке, Страница: 73 / 80

Installing EM-IP
Fig. 51: Installing EM-IP
2. Place EM-IP (Fig. 51/4) with the pin header
(Fig. 51/6) in the slot (Fig. 51/7) on the TCU3 or
TAM main PCB.
Gently push the four corners of EM-IP onto the
distance pieces (Fig. 51/5).
3. Screw-fix EM-IP with 3 fixing screws (Fig. 51/1)
and washers (Fig. 51/2) to the main PCB as
shown in Fig. 51.
NOTICE!
Tighten the fixing screws only hand-tight!
Fixing the ground strap
Fig. 52: Fixing the ground strap
4. Fix the ground strap (Fig. 52/3) with the fixing
screw (Fig. 52/1) and the washer (Fig. 52/2) to
EM-IP.
5. Fix the other end of the ground strap (Fig. 52/3)
with a fixing screw (Fig. 52/4) to the earth connec-
tion on the main PCB.
NOTICE!
Tighten the fixing screw only hand-tight!
Mounting the RTC module (optional)
Fig. 53: Fixing screw
6. Remove the fixing screw (Fig. 53/1).
Maintenance
Maintenance > Replacing the EM-IP expansion module
Expansion module EM-IP 73