Triumph Trophy Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 180

Triumph Trophy Скачать руководство пользователя страница 94

94

General Information

Warning

If, after fitment of the top box you have any
doubt about the performance of any aspect
of the motorcycle, contact an authorized
Triumph dealer and do not ride the
motorcycle until the authorized dealer has
declared it fit for use. Riding a motorcycle
when there is any doubt as to any aspect of
the performance of the motorcycle may
result in loss of control of the motorcycle
leading to an accident.

Warning

Never ride an accessory-equipped
motorcycle at speeds above 80 mph
(130 km/h). The presence of accessories
will cause changes in the stability and
handling of the motorcycle. Failure to allow
for changes in motorcycle stability may
lead to loss of control or an accident.
Remember that the 80 mph (130 km/h)
limit will be reduced by the fitting of
non-approved accessories, incorrect
loading, worn tires, overall motorcycle
condition and poor road or weather
conditions.

Warning

The motorcycle must not be operated
above the legal road speed limit except in
closed-course conditions.

Warning

Only operate this Triumph motorcycle at
high speed in closed-course on road
competition or on closed-course race
tracks. High speed operation should only
be attempted by riders who have been
instructed in the techniques necessary for
high speed riding and are familiar with the
motorcycle’s characteristics in all conditions.
High speed operation in any other
circumstances is dangerous and will lead to
loss of motorcycle control and an accident.

«
...
92
93
94
95
96
...
»

Содержание Trophy





















































































































































































Отзывы:

Нет отзывов