Triumph Trophy, Руководство пользователя, Страница: 61 / 180

61
General Information
Resuming the Cruise Control Set
Speed
Provided the cruise control has not been
deactivated by turning the ignition switch to
the OFF position, the previous set speed can
be resumed by pressing and releasing the
RES/+ end of the adjust button provided the
the conditions described on page
59 have
been met.
1. Cruise control ON/OFF button
2. Cruise control adjust button, SET/-
3. Cruise control adjust button, RES/+
The set speed will remain in the cruise control
memory until the ignition switch has been
turned to the OFF position.
Increasing Speed while in Cruise
Control
To increase the speed, press and release the
RES/+ end of the adjust button. Each press of
the button will increase the speed by 1 mph
or 1 km/h. If the button is held, the speed will
continuously increase in single digit
increments. When the desired speed is
shown in the display, stop pressing the adjust
button.
While increasing the speed, the display
screen in the instruments will show the new
set speed in the lower display area. The new
speed will flash until the motorcycle has
achieved that speed.
After 4 seconds the display screen will
change to the previous display.
Note:
• If riding up a steep incline and cruise
control is unable to maintain the set
speed, the instruments will show the
set speed flashing until the
motorcycle has regained the speed.
An alternative way to increase the speed in
cruise control is to accelerate to the desired
speed using the throttle grip and then press
the SET/- end of the adjust button.
Warning
When resuming cruise control, always
ensure that the traffic conditions are
suitable for the set speed.
Using cruise control in heavy traffic, on
roads with sharp/blind bends or when they
are slippery, may result in loss of
motorcycle control and an accident.
1
2
3
chdc