Triumph Trophy Скачать руководство пользователя страница 42

Страница: 42 / 180

General Information

Trip Time

The total time elapsed since the trip meter
was last set to zero. The counter will
increment while the engine is running.

Range to Empty

This is an indication of the probable distance
that can be travelled on the remaining fuel in
the tank.

Trip Distance

The total trip distance travelled since the trip
meter was last set to zero.

Fuel Used

The fuel used is calculated from the time
when the trip computer was last reset.

Tire Pressures

if Tire Pressure

Monitoring System (TPMS) is Fitted

Tire pressure information is displayed for
each tire (see page

). The letter F or R

identifies the front or rear tire.

Digital Speedometer

The digital speedometer displays the current
speed in the selected units (mph or km/h).
The units are set independently of the units
set in the Bike Setup menu.

TES Settings (Trophy SE only)

The display will show the current settings for
the TES system; the upper line will show the
TES Mode (see page

) and the lower line

will show the TES Loading (see page

1:54

189.2

144.2

4.8

GAL

F 36

R 42

PSI

MPH

SPORT

Содержание Trophy





















































































































































































Результаты поиска

Содержание Trophy

Отзывы:

Triumph Trophy, Руководство пользователя, Страница: 42 / 180

Результаты поиска

Содержание Trophy

Отзывы: