Triumph Trophy, Руководство пользователя, Страница: 100 / 180

100
How to Ride the Motorcycle
To Stop the Engine
1. Engine stop switch
2. Starter button
3. Neutral indicator light
4. ON position
5. Ignition switch
Close the throttle completely.
Select neutral.
Turn the ignition switch off.
Select first gear.
Support the motorcycle on a firm, level
surface with the side or center stand.
Lock the steering.
To Start the Engine
Check that the engine stop switch is in the
RUN position.
Ensure the transmission is in neutral.
Turn the ignition switch on.
Note:
• When the ignition is switched on,
the tachometer and speedometer
needles will quickly sweep from zero
to maximum and then return to
zero. The instrument warning lights
will illuminate and will then go off
(except those which normally
remain on until the engine starts -
see 'Warning Lights' on page
26 ). It
is not necessary to wait for the
needle to return to zero before
starting the engine.
P
U
SH
P
OFF
O
N
3
5
2
1
4
Caution
The engine should normally be stopped by
turning the ignition switch to the
OFF position. The engine stop switch is for
emergency use only. Do not leave the
ignition switched on with the engine
stopped. Electrical damage may result.