Triumph Trophy Скачать руководство пользователя страница 113 | Manualshive

Страница: 113 / 180

Triumph Trophy Скачать руководство пользователя страница 113

113

Accessories, Loading and Passengers

Warning

Never attempt to store any items in the
cockpit area. This can restrict the steering
and will cause loss of control leading to an
accident.

Weight attached to the handlebar or front
fork will increase the mass of the steering
assembly and can result in loss of steering
control leading to an accident.

Warning

Do not carry a passenger unless he or she
is tall enough to reach the footrests
provided.

A passenger who is not tall enough to
reach the footrests will be unable to sit
securely on the motorcycle and may cause
instability leading to loss of control and an
accident.

X

X

Warning

Never ride an accessory-equipped
motorcycle, or a motorcycle carrying a
payload of any kind, at speeds above
80 mph (130 km/h). In either/both of
these conditions, speeds in excess of
80 mph (130 km/h) should not be
attempted even where the legal speed
limit permits this.

The presence of accessories and/or
payload will cause changes in the stability
and handling of the motorcycle.

Failure to allow for changes in motorcycle
stability may lead to loss of control or an
accident.

Remember that the 80 mph (130 km/h)
absolute limit will be reduced by the fitting
of non-approved accessories, incorrect
loading, worn tires, overall motorcycle
condition and poor road or weather
conditions.

«
...
111
112
113
114
115
...
»

Содержание Trophy





















































































































































































Отзывы:

Нет отзывов