Triumph Trophy Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 180

Triumph Trophy Скачать руководство пользователя страница 5

5

Foreword - Safety First

FOREWORD - SAFETY FIRST

The Motorcycle

Warning

This motorcycle is designed for on-road
use only. It is not suitable for off-road use.

Off-road operation could lead to loss of
control of the motorcycle resulting in an
accident causing injury or loss of life.

Warning

This motorcycle is not designed to tow a
trailer or be installed with a sidecar.
Installing a sidecar and/or a trailer may
result in loss of control and an accident.

Warning

This motorcycle is designed for use as a
two-wheeled vehicle capable of carrying a
rider on his/her own, or a rider and one
passenger.

The total weight of the rider, and any
passenger, accessories and luggage must
not exceed the maximum load limit of
526 lbs (239 kg).

Warning

This motorcycle is installed with a catalytic
converter below the engine, which along
with the exhaust system reaches very high
temperature during engine operation.
Flammable materials such as grass,
hay/straw, leaves, clothing and luggage etc.
could ignite if allowed to come into contact
with any part of the exhaust system and
catalytic converter; always ensure
flammable materials are not allowed to
contact the exhaust system or catalytic
converter.

«
...
3
4
5
6
7
...
»

Содержание Trophy





















































































































































































Отзывы:

Нет отзывов