manualshive.com logo in svg

Triumph Trophy, Руководство пользователя, Страница: 145 / 180

Поделиться
Скачать
Triumph Trophy Скачать руководство пользователя страница 145

145

Maintenance and Adjustment

Tire Wear

As the tire tread wears down, the tire
becomes more susceptible to punctures. It is
estimated that 90% of all tire problems occur
during the last 10% of tread life (90% worn).
It is therefore not recommended to use tires
until they are worn to their minimum.

Minimum Recommended Tread 
Depth

In accordance with the periodic maintenance
chart, measure the depth of the tread with a
depth gauge, and replace any tire that has
worn to, or beyond, the minimum allowable
tread depth specified in the table below:

Under 80 mph 
(130 km/h)

0.08 in (2 mm)

Over 80 mph 
(130 km/h)

Rear 0.12 in (3 mm) 
Front 0.08 in (2 mm)

Warning

This motorcycle must not be operated
above the legal road speed limit except in
authorized closed-course conditions.

cboa

Warning

Only operate this Triumph motorcycle at
high speed in closed-course on-road
competition or on closed-course racetracks.
High-speed operation should only then be
attempted by riders who have been
instructed in the techniques necessary for
high-speed riding and are familiar with the
motorcycle's characteristics in all
conditions. High-speed operation in any
other circumstances is dangerous and will
lead to loss of motorcycle control and an
accident.

Warning

Operation with excessively worn tires is
hazardous and will adversely affect
traction, stability and handling which may
lead to loss of control and an accident.

When tires become punctured, leakage is
often very slow. Always inspect tires very
closely for punctures. Check the tires for
cuts, embedded nails or other sharp
objects. Operation with punctured or
damaged tires will adversely affect stability
and handling which may lead to loss of
control or an accident.

Check the rims for dents or deformation.
Operation with damaged or defective
wheels or tires is dangerous and loss of
control or an accident could result.

Always consult your authorized Triumph
dealer for tire replacement, or for a safety
inspection of the wheels and tires.

Содержание Trophy





















































































































































































Отзывы:

Нет отзывов