Instruments
82
Warning
If ABS and/or TC has been disabled
using the BIKE SETUP menu, the ABS
and/or TC settings saved for all riding
modes will be overridden.
ABS and/or TC will remain OFF
regardless of the riding mode selection,
until they have been re-enabled or, the
ignition has been switch OFF then ON
again.
If the ABS is disabled, the brake system
will function as a non-ABS braking
system. In this situation braking too
hard will cause the wheels to lock, and
may result in loss of motorcycle control
and an accident.
If the traction control is disabled, the
motorcycle will handle as normal but
without traction control. In this
situation accelerating too hard on wet/
slippery road surfaces may cause the
rear wheel to slip, and may result in loss
of motorcycle control and an accident.
Warning
After selecting a riding mode, operate
the motorcycle in an area free from
traffic to gain familiarity with the new
settings.
Do not loan your motorcycle to anyone
as they may change the riding mode
settings from those you are familiar
with, causing loss of motorcycle control
and an accident.
To select a riding mode:
Press and release the MODE button on
the left hand switch housing to activate
the riding mode selection menu in the
multifunction display.
OFF-ROAD
OFF-ROAD
OFF-ROAD
OFF-ROAD
OFF-ROAD
C N S
MAP
Riding Mode Selection Menu
Further presses of the MODE button will
scroll through the riding modes in the
following order:
• RAIN
• ROAD
• OFF-ROAD.
Alternatively, the SCROLL button can be
used to scroll up or down through the
riding modes.
Note:
• To allow the user to scroll between
each of the modes, there is a short
time-out to allow for further
scrolling to take place before the
highlighted riding mode is
automatically activated.
Scroll through the riding modes until the
desired mode is highlighted in the
selection window.
