Instruments
46
To disable or enable the TSAS riding
modes link:
• Press the joystick center to select
RIDING MODES LINK.
• Push the joystick down/up to scroll
between DISABLED and ENABLED.
• Press the joystick center to select
the required option.
Mode
This allows the adjustment of the
settings from soft to hard by adjusting
the rebound and compression damping
settings.
Selecting AUTO sets the TSAS system to
automatically detect the type of surface
being ridden on (road or off-road) and
will adjust the rebound and compression
damping settings accordingly.
Setting On-Road
This applies the optimal TSAS settings
for on-road use and adjusts the
rebound and compression damping
settings accordingly.
Setting Off-Road
This applies the optimal TSAS settings
for off-road use and adjusts the
rebound and compression damping
settings accordingly.
Bike Set Up - Triumph Shift Assist
(if equipped)
Triumph Shift Assist triggers a
momentary engine cut to allow gears to
engage, without closure of the throttle
or operation of the clutch. This feature
works for both up-shifts and down-
shifts of gear.
The clutch must be used for stopping
and pulling away.
Triumph Shift Assist will not operate if
the clutch is applied or if an up-shift is
attempted by mistake when in 6th gear.
It is necessary to use a positive pedal
force to make sure there is a smooth
gear shift.
TSAS
TRIUMPH SHIFT ASSIST
HILL HOLD
INDICATORS
EXIT
BIKE SETUP
ABS
TRIUMPH SHIFT ASSIST
DISABLED
ENABLED
TC
SERVICE
To enable/disable Triumph Shift Assist:
• From the Bike Set Up menu, push
the joystick down to select
TRIUMPH SHIFT ASSIST and press
the joystick to confirm.
• Push the joystick down/up to scroll
between ENABLED and DISABLED.
• Press the joystick center to confirm
the required selection.
• The display will then return to the
BIKE SET UP menu.
