Triumph Tiger 1200 XR Series, Руководство пользователя

Страница: 34 / 226

Instruments
34
Riding Mode Selection
Warning
The selection of riding modes while the
motorcycle is in motion requires the
rider to allow the motorcycle to coast
(motorcycle moving, engine running,
throttle closed, clutch lever pulled in
and no brakes applied) for a brief
period of time.
Riding mode selection while the
motorcycle is in motion should only be
attempted:
• At low speed
• In traffic-free areas
•
On straight and level roads or
surfaces
• In good road and weather conditions
•
Where it is safe to allow the
motorcycle to briefly coast.
Riding mode selection while the
motorcycle is in motion MUST NOT be
attempted:
• At high speeds
• While riding in traffic
• During cornering or on winding roads
or surfaces
• On steeply inclined roads or surfaces
• In poor road/weather conditions
• Where it is unsafe to allow the
motorcycle to coast.
Failure to observe this important
warning may lead to loss of motorcycle
control and an accident.
Warning
If ABS and/or traction control (TC) has
been disabled in the Main Menu as
described on, page
48
for ABS and/or
page 48 for TC settings saved for all
riding modes will be overridden.
ABS and/or TC will remain off
regardless of your riding mode
selection until they have been re-
enabled or, the ignition has been
switched off then on again, or the
MODE button is held in to return to the
default ROAD mode (which enables ABS
and/or TC when the motorcycle is next
stationary).
If the ABS is disabled, the brake system
will function as a non-ABS equipped
braking system. In this situation
braking too hard will cause the wheels
to lock, and may result in loss of
motorcycle control and an accident.
If the traction control is disabled, the
motorcycle will handle as normal but
without traction control. In this
situation accelerating too hard on wet/
slippery road surfaces may cause the
rear wheel to slip, and may result in
loss of motorcycle control and an
accident.