Triumph Tiger 1200 XR Series, Руководство пользователя

Страница: 32 / 226

Instruments
32
Fuel Gage
The fuel gage indicates the amount of
fuel in the tank.
o7:29
17.5
8
6
N
4
2 0
12 14
F
E
AM
RPM
x1000
mph
1
42 122
mi
RANGE mpg
10
1. Fuel gage
With the ignition switched on, a filled
line indicates the fuel remaining in the
fuel tank.
Note:
• The fuel gage colors may vary
depending on the theme or style
chosen.
The gage markings indicate
intermediate fuel levels between E
(empty) and F (full).
The low fuel warning light will illuminate
when approximately 1.0 gallon (3.5 liters)
of fuel is remaining in the tank and you
should refuel at the earliest opportunity.
The range to empty and instantaneous
fuel consumption will be also shown in
the information tray. Press the joystick
center to acknowledge and hide the low
fuel warning.
After refueling, the fuel gage and range
to empty information will be updated
only while riding the motorcycle.
Depending on the riding style, updating
could take up to five minutes.
Service Interval Announcement
The service interval
announcement shows the total distance
or time that the motorcycle has
remaining before a service is required.
When the remaining distance is 0 miles
(0 km), or the remaining time is 0 days,
the service symbol will remain on until
the service has been carried out and
the system has been reset by your
authorized Triumph dealer.
If the service is overdue then OVERDUE
will be shown and the service symbol
will be shown in the information tray.
When the service has been carried out
by your authorized Triumph dealer, the
system will be reset.
The distance to the next service or
OVERDUE message will also be shown
on the instrument start up screen when
the ignition is turned on.
The service symbol will also be shown if
a fault has occurred and the ABS and/
or MIL warning lights are illuminated.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
Ambient Air Temperature
The ambient air temperature is
displayed as either
o
C or
o
F.
When the motorcycle is stationary the
heat of the engine may affect the
accuracy of the ambient temperature
display.
Once the motorcycle starts moving the
display will return to normal after a
short time.