Instruments
83
The name of the highlighted riding mode
and its currently stored ABS, MAP and
TC settings, are displayed on the left
hand side of the multifunction display.
The currently active riding mode is
indicated with a border.
OFF-ROAD
OFF-ROAD
OFF-ROAD
OFF-ROAD
OFF-ROAD
C N S
MAP
1
2
3
1.
Selected riding mode
2. Selected riding mode’s ABS, MAP and
TC settings
3.
Currently active riding mode
The riding mode shown in the selection
window is automatically activated once
the time-out has elapsed, and the
following conditions for switching modes
have been met.
Motorcycle Stationary - Engine Off
• The ignition is switched ON.
• The engine stop switch is in the
RUN position.
Motorcycle Stationary - Engine On
• Neutral gear is selected or the
clutch is pulled in.
Motorcycle in Motion
Within 30 seconds of selecting a riding
mode the rider must carry out the
following simultaneously:
• Close the throttle
• Pull the clutch in
• Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
Note:
• It is not possible to select OFF-
ROAD mode while the motorcycle is
in motion, if the ABS or TC settings
are set to OFF-ROAD or OFF.
• In this case, the motorcycle must
be brought to a stop before the
riding mode change can take place.
Once the ABS, MAP and TC settings
have changed, the multifunction display
will return to the home screen and the
selected riding mode will be shown.
OFF-ROAD
AUTO
OFF-ROAD
MPG
MI
PSI
PSI
C N S
1
2
36
42
F
R
47
12
2
1
1.
Selected riding mode
2.
Home screen
The riding mode change is now
complete and normal riding can be
resumed.