Maintenance
204
To install the battery:
• Place the battery in the battery
case.
• Reconnect the battery, positive
(red) lead first.
• Apply a light coat of grease to the
terminals to prevent corrosion.
• Cover the positive terminal with the
protective cap.
• Refit the battery strap.
• Refit the chassis ECM cover and
secure with the wing nut. Tighten
the wing nut to
1.25
Nm
.
• Refit the rider's seat.
Note:
•
After reconnecting the battery, it is
necessary to allow the TSAS
system (if equipped) to recalibrate,
see page 110.
Fuse Boxes
Warning
Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover) and never use a
fuse of higher rating.
Use of an incorrect fuse could lead to
an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
Main Fuse
The 40
Amp main fuse is located
beneath the rider's seat and behind the
seat bridge.
To access the main fuse, the rider’s seat
must be removed.
1
1.
Main fuse
ABS Fuse
The 40
Amp ABS fuse is located beneath
the rider's seat and behind the main
fuse box.
