General Information
131
To access the USB socket:
• Remove the passenger seat.
• Remove the cap from the USB
socket.
• Connect your device using a
suitable USB cable, then stow the
device and USB cable in the space
available under the passenger seat.
Caution
Make sure that all electronic devices
and cables are safely secured under
the seat when riding.
Make sure there is sufficient space
surrounding any electronic devices for
the seat to close without causing any
damage to the electronic device or the
motorcycle.
• Fit the passenger seat, making sure
that the device or USB cable is not
trapped.
• Turn the ignition on and start the
engine.
Caution
Do not leave the ignition switch in the
ON position unless the engine is
running as this will discharge the
battery.
• When your device has finished
charging, remove the passenger
seat and disconnect the device.
• Refit the USB socket cap and refit
the passenger seat.
Note:
•
The USB socket is protected by a
chassis
ECM,
which
will
automatically cut power to the
socket in the event of an overload.
•
Power can be restored to the USB
socket by turning the ignition
switch off then on again, provided
that the socket is not still
overloaded.
