General Information
111
TSAS Modes
The following TSAS modes are available
for selection:
• Auto - The TSAS system will
automatically detect the type of
surface being ridden on (road or
off-road) and will adjust rebound
and compression damping settings
accordingly.
• Off-Road - Optimal TSAS settings
for off-road use.
TSAS Damping Settings
There are a total of nine damping
settings available for selection ranging
from COMFORT (soft) to SPORT (firm)
with the three main settings being:
• COMFORT
• NORMAL
• SPORT.
For more information on accessing the
TSAS settings, see page 47.
System Calibration
The TSAS system will recalibrate
adjustment motors under the following
conditions:
• If
the
battery
has
been
disconnected for any reason.
• If a fault occurs with the TSAS
system during normal operation.
The warning light will flash twice every
second during system recalibration.
To allow the system to calibrate
correctly, the following procedure must
be adhered to:
• Turn the ignition on. Do not start
the engine.
• Wait for the warning light to stop
flashing indicating that adjustment
motor calibration is complete.
• Start the engine. If the warning
light
resumes
flashing.
the
adjustment
motors
are
being
recalibrated due to low battery
voltage.
• Wait for the warning light to stop
flashing
before
riding
the
motorcycle.
Failure to follow this procedure will
cause the recalibration to be stopped
and the warning light to remain lit.
In this case the warning light will
extinguish once the recalibration is next
allowed to complete.
