background image

General Information

83

To remove the rider seat:
•  Insert the ignition key into the seat 

lock and turn it anticlockwise while 

pressing down on the rear of the 

seat.

•  This will release the rider seat from 

its lock.

•  Lift the seat up from the rear, and 

slide the seat rearwards to remove 

it from the motorcycle.

4

3

2

1

1.  Locating peg
2.  Locating peg lock
3.  Seat bracket
4.  Fuel tank hinge

To install the rider seat:
•  Position the seat's front bracket 

under the fuel tank hinge.

•  Align the locating peg to the lock.
•  Press the seat down engaging the 

locating peg in the lock. An audible 

click can be heard when the seat is 

fully engaged.

Rider and Passenger Seat

 Warning

To prevent detachment of the seat 

during riding, after fitting always 

grasp the seat and pull firmly upwards.
If the seat is not correctly secured in 

the lock, it will detach from the lock.
A loose or detached seat may cause 

loss of motorcycle control and an 

accident.

The rider and passenger seats are 

joined together to form one seat for 

ease of removal and installation.
To remove the rider and passenger seat:
•  Insert the ignition key into the seat 

lock and turn it counterclockwise 

while pressing down on the rear of 

the seat.

•  This will release the seat from its 

lock.

•  Lift the seat up from the rear, and 

slide the seat rearwards to remove 

it from the motorcycle.

4

3

2

1

1.  Locating peg
2.  Locating peg lock
3.  Seat bracket
4.  Fuel tank hinge

Содержание Rocket 3 TFC 2020



















































































































































































Отзывы: