Triumph Rocket 3 TFC 2020, Руководство пользователя

Страница: 128 / 178

Maintenance
128
To inspect the clutch fluid level:
• Check the level of clutch fluid visible
in the window at the side of the
reservoir body.
• The clutch fluid level in the reservoir
must be kept between the MAX
(maximum) and MIN (minimum) level
lines (reservoir held horizontal).
To adjust the clutch fluid level:
• Clean the reservoir cap before
removing. This helps to prevents dirt
and dust entering the reservoir.
• Remove the reservoir cap screws.
• Remove the reservoir cap, plastic
plate and the diaphragm seal.
• Fill the reservoir to the MAX level
line using new DOT 4 fluid from a
sealed container.
• Refit the diaphragm seal noting
that is correctly positioned in the
reservoir.
• Refit the plastic plate.
• Refit the reservoir cap.
• Refit and tighten the reservoir cap
screws to 1.5 Nm.
Clutch Inspection
Check that there is 2 - 3 mm clutch
lever free play at the lever.
If there is an incorrect amount of free
play, adjustments must be made.
Final Drive Unit
Check the final drive unit for oil leaks
in accordance with the scheduled
maintenance chart.
Check the final drive unit for oil changes
in accordance with the scheduled
maintenance chart.
Final Drive Unit Oil Level
Adjustment
Warning
Under no circumstances should the
final drive unit be disassembled.
Failure to observe this warning could
lead to a malfunction of the final drive
unit causing lock-up of the rear wheel
leading to loss of motorcycle control
and an accident.
1
1. Filler level plug
To adjust the oil level in the final drive
unit:
• Remove the filler level plug.