Triumph Rocket 3 TFC 2020 Скачать руководство пользователя

Страница: 135 / 178

Maintenance

135

Wheel Bearings Inspection

Warning

Riding with worn or damaged front

or rear wheel bearings is dangerous

and may cause impaired handling and

instability leading to an accident.
If in doubt, have the motorcycle

inspected by an authorised Triumph

dealer before riding.

Note
If the wheel bearings in the front or

rear wheel allow play in the wheel hub,

are noisy, or if the wheel does not turn

smoothly, have your authorised Triumph

dealer inspect the wheel bearings.

The wheel bearings must be inspected

at the intervals specified in the

scheduled maintenance chart.

Front Fork Inspection

Warning

Riding the motorcycle with defective

or damaged suspension is dangerous

and may lead to loss of control and an

accident.

Warning

Never attempt to dismantle any part

of the suspension units
All suspension units contain

pressurised oil.
Skin and eye damage can result from

contact with the pressurised oil.

Inspecting the Front Forks

To inspect the forks:
• Position the motorcycle on level

ground.

• While holding the handlebars and

applying the front brake, pump the

forks up and down several times.

• If roughness or excessive stiffness

is detected, consult your authorised

Triumph dealer.

• Examine each fork for any sign of

damage, scratching of the slider

surface, or for oil leaks.

• If any damage or leakage is found,

consult an authorised Triumph

dealer.

Содержание Rocket 3 TFC 2020



















































































































































































Результаты поиска

Содержание Rocket 3 TFC 2020

Отзывы:

Похожие инструкции для Rocket 3 TFC 2020

Бренды по названию

Популярные бренды

Triumph Rocket 3 TFC 2020, Руководство пользователя

Результаты поиска

Содержание Rocket 3 TFC 2020

Отзывы:

Похожие инструкции для Rocket 3 TFC 2020

Бренды по названию

Популярные бренды