Triumph Rocket 3 TFC 2020, Руководство пользователя

Страница: 144 / 178

Maintenance
144
Warning
Tyres and inner tubes that have been
used on a rolling road dynamometer
may become damaged. In some cases,
the damage may not be visible on the
external surface of the tyre.
Tyres and inner tubes must be
replaced after such use as continued
use of a damaged tyre or inner
tube may lead to instability, loss of
motorcycle control and an accident.
Tyre Wear
As the tyre tread wears down, the tyre
becomes more susceptible to punctures
and failure. It is estimated that 90%
of all tyre problems occur during the
last 10% of tread life (90% worn). It is
recommended that tyres are changed
before they are worn to their minimum
tread depth.
Minimum Recommended Tread
Depth
In accordance with the periodic
maintenance chart, measure the depth
of the tread with a depth gauge, and
replace any tyre that has worn to, or
beyond, the minimum allowable tread
depth specified in the table below:
Under 80 mph
(130 km/h)
2 mm (0.08 in)
Over 80 mph
(130 km/h)
Rear 3 mm (0.12 in)
Front 2 mm (0.08 in)
Warning
This motorcycle must not be operated
above the legal road speed limit except
in authorised closed-course conditions.
Warning
Only operate this Triumph motorcycle
at high speed in closed-course, on-
road competition or on closed-course
racetracks.
High speed operation should only
then be attempted by riders who have
been instructed in the techniques
necessary for high speed riding and
are familiar with the motorcycle's
characteristics in all conditions.
High speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.