Triumph Rocket 3 TFC 2020 страница 126 Скачать руководство пользователя

Страница: 126 / 178

Maintenance

126

• Add coolant mixture through the

filler opening until the level reaches

the MAX mark.

• Refit the coolant expansion tank

cap.

Coolant Change

It is recommended that the coolant

is changed by an authorised Triumph

dealer in accordance with scheduled

maintenance requirements.

Radiator and Hoses

Warning

The fan operates automatically when

the engine is running.
Always keep hands and clothing away

from the fan.
Contact with the rotating fan may

cause an accident and/or personal

injury.

Caution

Using high pressure water sprays,

such as from a car wash facility or

household pressure washer, can

damage the radiator fins, cause leaks

and impair the radiator's efficiency.
Do not obstruct or deflect airflow

through the radiator by installing

unauthorised accessories, either in

front of the radiator or behind the

cooling fan.
Interference with the radiator airflow

can cause overheating, potentially

resulting in engine damage.

Check the radiator hoses for cracks

or deterioration, and tension clips for

tightness in accordance with scheduled

maintenance requirements. Have your

authorised Triumph dealer replace any

defective items.
Check the radiator grille and fins for

obstructions by insects, leaves or

mud. Clean off any obstructions with a

stream of low pressure water.

Содержание Rocket 3 TFC 2020



















































































































































































Результаты поиска

Содержание Rocket 3 TFC 2020

Отзывы:

Похожие инструкции для Rocket 3 TFC 2020

Бренды по названию

Популярные бренды

Triumph Rocket 3 TFC 2020, Руководство пользователя

Результаты поиска

Содержание Rocket 3 TFC 2020

Отзывы:

Похожие инструкции для Rocket 3 TFC 2020

Бренды по названию

Популярные бренды