Triumph Adler P-C3570DN, Руководство пользователя

Страница: 168 / 255

Using the Operation Panel 4-95
• RAM disk error.
• Incorrect account ID.
• Account error.
• Cannot duplex print on this paper.
• Job Accounting restriction exceeded.
• No multi copies.
• USB memory error.
• Restricted by Job Accounting.
• Job not stored.
For the procedure for setting the automatic error recovery time, refer to
Err. Clear Timer (Setting the error clear time) on page 4-95 .
1
In the Timer Setting menu, press

or

to select
Auto Err.
Clear
.
2
Press [OK] . The
Auto Err. Clear
screen appears.
3
Press

or

to select whether automatic error recovery is enabled.
4
Press [OK] . The automatic error recovery setting is set and the Timer
Setting menu reappears.
Err. Clear Timer (Setting the error clear time)
If
Auto Err. Clear
is set to
On
and a non-fatal error (an error that
allows printing to continue) occurs, this setting specifies the time until the
error is recovered and printing resumes. The default setting is
30
seconds.
1
In the Timer Setting menu, press  or  to select
Err. Clear
Timer
.
2
Press [OK] . The
Err. Clear Timer
screen appears.
3
Use the arrow keys to set the recovery time.
Press  or  to increase or decrease, respectively, the value at the
blinking cursor.
Use
 and  to move the cursor right and left.
4
Press [OK] . The recovery time setting is stored and the Timer Setting
menu reappears.
Auto Err. Clear:
a b
1
*Off
2 On
Err. Clear Timer: a b
(5 - 495)
/**30-
sec.
M