Triumph Adler LP 218, Инструкция по эксплуатации

Страница: 33 / 237

2-6
Operational Precautions
Chapt
er
2
S
e
tt
ing-Up
• Never place any heavy objects on the power cord, pull on it or bend
it. Doing so creates the danger of fire or electrical shock.
• Always make sure the printer is not placed on the electrical cord or
the communications cables of any other electrical equipment. Also
make sure that cords and cables do not get into the printer’s mecha-
nism. Any of these conditions create the danger of malfunction and
fire.
• Always take care so that paper clips, staples, or other small pieces
of metal do not get into the printer through its vents or other open-
ings. Such objects create the danger of fire or electrical shock.
• Do not allow water or other liquids to spill on or near the printer.
Fire or electrical shock can occur should water or liquid come into
contact with the printer.
• Should liquid or any piece of metal accidently get inside the printer,
immediately turn it off, unplug the power cord, and contact cus-
tomer support. Failure to take this immediate action creates the dan-
ger of fire or electrical shock.
• Whenever the printer emits unusually high amounts of heat, smoke,
an unusual odor, or noise, immediately turn it off, unplug it, and
contact customer support. Failure to take this immediate action cre-
ates the danger of fire or electrical shock.
Caution
◆
Be sure to locate the printer in a well-ventilated location. A minimal
amount of ozone is generated during normal operation of this
printer. Because of this, an unpleasant odor may result when the
printer is used for extensive printing in a poorly ventilated area. For
comfortable, healthy, and safe operation, be sure to locate the
printer in a well-ventilated area.