Triumph Adler DC 2042, Инструкция по эксплуатации

Страница: 45 / 109

1. Touch the "FUNCTION" key.
The function selection screen will appear.
2. Touch the "BOOKLET" key. If it is not displayed, touch "
▼
" or "
▲
" key to be displayed.
The Booklet mode setting screen will appear.
41
FUNCTIONS
3. Select the type of originals. "DUPLEX" or "1-SIDED" can be selected.
4. Specify the binding orientation, by touching the "LEFT" or "RIGHT" key.
* If an optional booklet stitcher is installed, specify the finishing setting.
5. Set the original(s).
* When setting original on the platen, start with the first page.
6. Press the Start key.
* When using the DF, have originals read and copied one at a time.
* If setting originals on the platen, go to next step.
7. Set the original and touch the "CONTINUE" key after it has been read.
* Repeat this operation for all the originals.
8. After all originals have been read, touch the "TO PRINT" key. Copying will begin. After
finishing copying, the touch panel will return to the basic screen.
(16) Copying and stitching into booklet (sheet originals) [Stitching mode]
This mode can be used to copy duplex or one sided originals into duplex copies with two
pages on each side and to staple the copies arranged in order of page into a booklet
with a cover such as a weekly magazine or a pamphlet.
* The original size is limited to A4 (horizontal), and the copy size is limited to A3 and A4
(vertical).
* To use this function, an optional booklet stitcher must be installed.