Triumph Adler DC 2042 Скачать руководство пользователя страница 41

Страница: 41 / 109

5. Touch the "COPIED" key to copy onto backing sheet, and touch the "BLANK" key not

to copy.

FUNCTIONS

6. Specify the type of original, by touching "DUPLEX" or "1-SIDED" key.

The touch panel will return to the basic screen.

(12) Making image overlay [Form overlay]
This mode can be used to read the first original into memory and have its image overlaid
onto copies made from subsequent originals. The exposure of overlaid image can be
adjusted.

1. Touch the "FUNCTION" key.

The function selection screen will appear.

2. Touch the "OVERLAY" key. If it is not displayed, touch the "

▼

" key or "

▲

" key to be

displayed.
The overlay mode setting screen will appear.

3. Select the copy exposure for an original to be overlaid and touch the "ENTER" key.

The exposure level can be selected from among 10 steps from 10% to 100%.
The touch panel will return to the basic screen.

4. Set the original(s).

* If originals are set in the DF, set the image overlay original as 1st sheet.
* If originals are set on the platen, set the image overlay original.

Содержание DC 2042














































































































Результаты поиска

Содержание DC 2042

Отзывы:

Похожие инструкции для DC 2042

Бренды по названию

Популярные бренды

Triumph Adler DC 2042, Инструкция по эксплуатации

Результаты поиска

Содержание DC 2042

Отзывы:

Похожие инструкции для DC 2042

Бренды по названию

Популярные бренды