manualshive.com logo in svg

Triumph Adler DC 2042, Инструкция по эксплуатации


Поделиться
Скачать
background image

22

FUNCTIONS

2. Remove the present original(s), and put it/them aside.
3. Set the new original(s) and execute copying.

4. When copying ends, press the interrupt copy key again, and replace the newly copied

original(s) with the one(s) removed. Then press the Start key. The interrupted copying
will be resumed.

(4) Duplex copying from various originals [Duplex copy]
Duplex copy is available from various originals, such as two-page originals and one-
sided original.
* The paper sizes that can be used are A3 to A5R.

●

Duplex copying from duplex originals

Duplex (back and front) original is copied on both sides in the same manner.

●

Duplex copying from a book original

Two-page originals of a magazine or a book are copied on both 
sides of paper by a single Start key operation.
The binding direction of the originals can also be selected.

1

"LEFT": Two-page originals are copied from the right side.

2

"RIGHT": Two-page originals are copied from the left side.

* The original size used in this mode is limited to A3, A4 (vertical) or A5 (vertical).

●

Duplex copying from one-sided original 

One-sided original is copied on both sides (back and front). When the originals are odd,
the back side of the last page becomes a blank.

Содержание DC 2042














































































































Отзывы:

Нет отзывов

Похожие инструкции для DC 2042

Infotec IS2035 User Manual preview
IS2035
Бренд: Infotec Страницы: 98

Бренды по названию

Популярные бренды

Загрузить еще бренды