Triron KAHO, Инструкция по установке и эксплуатации

Страница: 9 / 20

Manual mixer shower
7
FITTING THE MIXER
IMPORTANT:
Make sure that all the supply pipework
has been flushed through before fitting
the mixer
(fig.7).
• Connect the hot water supply to the inlet
marked HOT, ‘H’ or red/orange label (1/2"
BSP) and connect the cold water supply to
the inlet marked COLD, ‘C’ or blue label (1/2"
BSP)
(fig.8) .
The fittings used should be 1/2" BSP to 15mm
connectors. They will need to be fitted into
the Hot, Cold and Exit ports on the mixer - the
fittings are
NOT supplied with the mixer.
Fig.7
Fig.8
Hot entry port
1/2" BSP to
15mm connectors
will need to be fitted.