Triron KAHO, Инструкция по установке и эксплуатации

Страница: 14 / 20

Manual mixer shower
12
COMMISSIONING
Check that both hot and cold water supplies
are fully open and at (or near to) their designed
temperature, and pressures are within the
requirements as stated.
Check the mixer can supply the maximum hot
and maximum cold water demands.
OPERATING THE SHOWER
• To start the shower, pull the control lever
upwards for maximum flow (fig.18) . To
stop the water flow, push the control lever
down
(fig.18) .
• To adjust the water temperature, turn the
control lever clockwise for a hotter shower
and anti-clockwise for a cooler shower
(fig.19) .
CLEANING
DO NOT use abrasive or solvent cleaning
fluids. The shower unit, riser rail, hose,
etc. should be cleaned using a soft cloth
and warm water.
IT IS IMPORTANT TO KEEP THE SPRAYHEAD
CLEAN TO MAINTAIN THE PERFORMANCE
OF THE SHOWER. The hardness of the water
will determine the frequency of cleaning. For
example, if the shower is used every day in a
very hard water area, it may be necessary to
clean the sprayhead on a weekly basis.
To stop
the shower
To start
the shower
Anti-clockwise
for cooler
Clockwise
for hotter
Fig.18
Fig.19
WARNING!
This mixer shower is NOT
thermostatic and WILL NOT
prevent water from flowing from
the sprayhead should there be a
loss of one supply to the mixer.