Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
35
35
35
35
Picture 29 PSControlProgram Parameter view
5.
Switch-off and restart the sensor to apply the changed network settings.
7.5
PS Range Module Configuration
7.5.1
Ways of Configuration
You can configure the PS Range Module in two ways:
•
Using the commands “GPRM get parameter” and “SPRM set parameter” of
the binary command/control interface. This way is most suitable for
computer programs, such as PSControlProgram
•
interactively using the RS232 Terminal Mode
7.5.2
About User Parameters
The entire sensor configuration is stored in a table of user parameters. Every
parameter has a number as unique parameter identification code. The user can
edit the parameter either by use of the Terminal Mode, or over RS232 and
Ethernet by use of binary commands.
